N-Ethyl-p-toluenesulfonamide Chemical name:N-Ethyl-p-toluenesulfonamide Molecular Formula:C9H12NO2S CAS Number:80-39-7 Structural type Specification Applications: It is used as plasticizer for polymide and fiber resin Package: 200KG plastic drum. Storage:
Our company uses high technology to produce high-purity spherical magnesium metal powder with particles ranging from 2mm to 0.0035mm (10-400 mesh). The magnesium content is above 99.5%, and the loose density is 0.1%-0.75%.
Silicone Oil is also known as Polydimethylsiloxane (PDMS), Dimethylpolysiloxane or Dimethicone, belongs to a group of polymeric organosilicon compounds that are commonly referred to as silicone. It is optically clear, odorless, inert, non-toxic, and non-f
Synonyms: ferrous sulfate hepta industry grade, ferrous sulphate heptahydrate industry grade, ferrous sulphate hepta industry grade; iron sulfate heptahydrate industry grade, iron sulfate hepta industry grade, iron sulphate heptahydrate industry grade, ir
Sodium acetate anhydrous is chemically designated CH3COONa, It is a hygroscopic white powder very soluble in water. It is available in USP/ FCC/ Technical/ E262/ ACS grades. It could be used as additives in food, industry, concrete manufacture, heating pa
1-Test-Cyp Dihydroboldenone Product Details DihydroboDihydroboldenone is structurally similar to methenolone and boldenone and less so to testosterone despite the commonly used name for it, 1-testosterone. For this reason some female athletes may be incli
High-Whiteness Aluminum Hydroxide, which is mainly used for fillers, flame retardants, aluminium sulfate and other industrial products with special whiteness requirements of raw materials aluminium hydroxide.
Lead Oxide Red Powder Molecular formula: Pb3O4 Appearance: mandarin red Powder Application: batteries Pb3O4: 80% Min. Residue through 63µm screen: 0.3% Max. Package: 25kg / 50kg / 1000kg Products for special purpose at customers’ specification / requireme
Introduction of the Palladium hydroxide CAS NO.12135-22-7 The Palladium hydroxide CAS NO.12135-22-7, also known as for palladium(II) oxide monohydrate, pale yellow-dark brown powder, dried in air, moisture content 1% to 15%, approximately the same as the
High Purity Synthetic Cryolite. The characteristics of sand-shaped cryolite are: 1.Low melting point, fast melting speed, can shorten the time to enter normal working state.2.Molecular ratio can be adjusted in a larger range, can adapt to different requir
SF500G is a 3.5 W/mK soft gap filler thermal interface material with great thermal performance and high compliancy. And it maintains a conformable yet elastic nature that allows for excellent interfacing and wet-out characteristics, even to surfaces with